scratches

[cscarlson]

I have a few scratches in my clearcoat, how do i get them out? i don't want to mess up the paint.

 

[c5y2k]

I'm thinking we need a bit more detail. Are they big scratches or the very small spider web scratches you only see when looking at an angle with good light source?

 

[cscarlson]

hey are small scratches that are seen whenever the light hits the vette right.

 

[c5y2k]

Sounds like you have the spider web scratches. The easiest way is to use a good buffer like the porter cable 7424. Then pick your favorite auto scratch remover. I personally have used the "smooth cut/light cut" polish from Top of the Line detailing supplies and it worked well. When I run out of that I think I'll try the Z-PC by Zaino.

I just got a black DD and its covered with this type of scratch so when it warms up I'll be trying the Zaino Z-5 pro to see if it will remove them.

 

[anniv88]

If you want to do it yourself you need to get a random orbital buffer, a polish for light scratches, wax, and the appropriate pads.

Griot's Garage and Adam's Polish are 2 good companies. You can buy a kit
with everything you need. Do a Google search. It's easy shopping.

I bought my stuff from Griots and they are excellent products. You can't burn the paint with an orbital buffer.

 

[gmjunkie]

I'm thinking we need a bit more detail. Are they big scratches or the very small spider web scratches you only see when looking at an angle with good light source?

Yes,Yes, We need photos!!

 

[cscarlson]

like scratches in image 861​

 

[gmjunkie]

like scratches in image 861​

861 and 862 are the same scratch,just a different angle!! I had to sand the heck out of it with a block and 2000 grit!! Steve's Rt Front Fender,Hood and Door had several that I had to sand to get them out!!Gotta be careful,the clear is only about 2-3 mill thick,thats thinner than a Cheap Garbage Bag!!

 

[vett boy]

861 and 862 are the same scratch,just a different angle!! I had to sand the heck out of it with a block and 2000 grit!! Steve's Rt Front Fender,Hood and Door had several that I had to sand to get them out!!Gotta be careful,the clear is only about 2-3 mill thick,thats thinner than a Cheap Garbage Bag!!

And ya did one hell of a job.Car finish is better than the factory.