- Thread starter
- #62
1
1yy07owner
Guest
need 82 ecm
need the ecmout of the 82 if it's available........
Dan
need the ecmout of the 82 if it's available........
Dan
- Thread starter
- #63
7
70 VETTE 454
Guest
parts REPLY
Hey Guys.....looks like some of you are getting a little pised waiting on no replies......
Well, if your needing some parts, I have a 70 BB w/black interior that im rebuilding and have taken it down to the bare frame so far.
Im getting a whole new suspension and breaking system, so I will be have most of those parts for sale here soon.
There are other parts im selling too but I have not gotten that far to get them off the car yet, my main concentration has been the frame and suspension, so if you are in need for parts other than that let me know if you do need something other than suspension or frame related parts like lines, gas tank, etc.
I will be cleaning all the parts off and make them back to almost new condition with paint and rust protectant and all and free of any minor rust build up, im very thorough and like to take time to make a part look good, just as if it were going back on my car, so ill sand blast and wire wheel it clean and looking better than before.
I do have to say, if you would bare with me on shipping, cause I am in the military and gone allot, but I am home from time to time, and I work on my vette when I can. Just the schedule that doesn't work for me.
You can defiantly get ahold of me at vette7072@yahoo.com or my work address der@carney.navy.mil anytime, I check this forum from time to time but the satellite connection isn't that great, so its hard to get on line out at sea, but I can at times. email is the best way to get ahold of me though.
I also have a brand new still in the box Energy Suspension Polly Urethane complete body bushing kit for a 70, but it will work on a 68-78 from front to rear. Was going to re-bush all my suspension and chassis parts I am now selling, but since im going with a whole complete system I don't need them.
if you have anything you want to add or are looking for just ask, im doing the whole car 100% rebuild so allot is open to sale, (like seats and door panels) and I may need stuff and can work something out too. All the parts are original, and in really surprising good shape for a 30+ year old car. the only part that is trashed beyond salvage is that center arm rest console thing, but then again that's common.
thanks for the time guys......
SK1(SW) David Rivera
USS CARNEY (DDG-64)
der@carney.navy.mil
"505 ft of American Fighting Steel"
Hey Guys.....looks like some of you are getting a little pised waiting on no replies......
Well, if your needing some parts, I have a 70 BB w/black interior that im rebuilding and have taken it down to the bare frame so far.
Im getting a whole new suspension and breaking system, so I will be have most of those parts for sale here soon.
There are other parts im selling too but I have not gotten that far to get them off the car yet, my main concentration has been the frame and suspension, so if you are in need for parts other than that let me know if you do need something other than suspension or frame related parts like lines, gas tank, etc.
I will be cleaning all the parts off and make them back to almost new condition with paint and rust protectant and all and free of any minor rust build up, im very thorough and like to take time to make a part look good, just as if it were going back on my car, so ill sand blast and wire wheel it clean and looking better than before.
I do have to say, if you would bare with me on shipping, cause I am in the military and gone allot, but I am home from time to time, and I work on my vette when I can. Just the schedule that doesn't work for me.
You can defiantly get ahold of me at vette7072@yahoo.com or my work address der@carney.navy.mil anytime, I check this forum from time to time but the satellite connection isn't that great, so its hard to get on line out at sea, but I can at times. email is the best way to get ahold of me though.
I also have a brand new still in the box Energy Suspension Polly Urethane complete body bushing kit for a 70, but it will work on a 68-78 from front to rear. Was going to re-bush all my suspension and chassis parts I am now selling, but since im going with a whole complete system I don't need them.
if you have anything you want to add or are looking for just ask, im doing the whole car 100% rebuild so allot is open to sale, (like seats and door panels) and I may need stuff and can work something out too. All the parts are original, and in really surprising good shape for a 30+ year old car. the only part that is trashed beyond salvage is that center arm rest console thing, but then again that's common.
thanks for the time guys......
SK1(SW) David Rivera
USS CARNEY (DDG-64)
der@carney.navy.mil
"505 ft of American Fighting Steel"
hi im looking for the inside drivers door panel for an 88 if you have it ..white would be nice
thanks ,tom
thanks ,tom
- Thread starter
- #65
7
70 VETTE 454
Guest
sorry tom, but all i have are the ones off my 70 (black) which will only fit up to a 78 if i rember corectly.
dave
dave
Big Tex
Well-known member
I don't need anything from that year car, but I do want to say thanks for serving our country and for being one of the world class people that keeps us safe. I simply cannot put into words how I feel about our service men and women. Godspeed, and get home safely...
- Thread starter
- #67
7
70 VETTE 454
Guest
Big Tex,
really appreciate all the support, and I cant say that there isn't a better job in the world that id rather be doing......well working on my vette, but that's all in fun. thanks again.......
really appreciate all the support, and I cant say that there isn't a better job in the world that id rather be doing......well working on my vette, but that's all in fun. thanks again.......
- Thread starter
- #70
7
70 VETTE 454
Guest
hey guys what going on......
Steve....
it is a automatic, but for a 70, but im sure it will still work.
Im not sure of that particular cable cause it is probably still on my body with the steering column, all i have been messing with is the chassis and suspension, but if you could give me a bit more info on what to look for ill look at it and get back to you. I will be back home Friday, cause were out to sea right now, so ill get back to you if I hear back from you by then.
Jeff....
yes BB is the only way I will go.....454 actually.....
what parts exactly. I have not messed with the engine other than pulling it out completely, but ill see what I got and can part with.
where in NY are you , i was just in NYC for fleet week and left today....
Dave
Steve....
it is a automatic, but for a 70, but im sure it will still work.
Im not sure of that particular cable cause it is probably still on my body with the steering column, all i have been messing with is the chassis and suspension, but if you could give me a bit more info on what to look for ill look at it and get back to you. I will be back home Friday, cause were out to sea right now, so ill get back to you if I hear back from you by then.
Jeff....
yes BB is the only way I will go.....454 actually.....
what parts exactly. I have not messed with the engine other than pulling it out completely, but ill see what I got and can part with.
where in NY are you , i was just in NYC for fleet week and left today....
Dave
hamil66
Member
Looking for coil springs for a 73 convertible. Carlinst98 said:
- Thread starter
- #72
7
70 VETTE 454
Guest
hey carl,
i got the springs your looking for.
do you need the front, rear or both sets.....let me know???
for a faster response email me to vette7072@yahoo.com or/and der@carney.navy.mil
dave
i got the springs your looking for.
do you need the front, rear or both sets.....let me know???
for a faster response email me to vette7072@yahoo.com or/and der@carney.navy.mil
dave
- Thread starter
- #74
O
opto1998
Guest
I am looking for the vent control assembly, with levers, that attaches to the center console for 68 vette.
Thanks,
Will opto1998@yahoo.com
Thanks,
Will opto1998@yahoo.com
jjoyal68
Member
Insta98, do you have the rear bottom valance for a 68 vert, also the front crossmember and front bumper w/ brackets. thanks jjoyal68
- Thread starter
- #76
7
70 VETTE 454
Guest
opto1998:
sorry on the vent control assy, but im using mine in my restoration
jjoyal68:
im not sure if I have the rear bottom valance, but do you have a bit more detail as to what it looks like so I can check,
as for the front bumper with brackets I need one also, so if you come across an extra one let me know....and as for the front cross member I need that part for my restore, so I cant part with that....
but either way let me know if there is anything else you might need???
Dave
sorry on the vent control assy, but im using mine in my restoration
jjoyal68:
im not sure if I have the rear bottom valance, but do you have a bit more detail as to what it looks like so I can check,
as for the front bumper with brackets I need one also, so if you come across an extra one let me know....and as for the front cross member I need that part for my restore, so I cant part with that....
but either way let me know if there is anything else you might need???
Dave
jjoyal68
Member
rear valance
Dave, sorry I'm late on my reply, the rear valance is the body section where the exhaust pipes exit and the backup lights are, I could be wrong about it being called that, as I am new to this hobby or sport. Thanks JJoyal 
Dave, sorry I'm late on my reply, the rear valance is the body section where the exhaust pipes exit and the backup lights are, I could be wrong about it being called that, as I am new to this hobby or sport. Thanks JJoyal
- Thread starter
- #78
7
70 VETTE 454
Guest
JJoyla,
now i know what your talking about. Like you, im new to this too, but im learning as i go. I had to cut mine to get the body off the frame, but i need it to put my rear body back together....sorry.
now i know what your talking about. Like you, im new to this too, but im learning as i go. I had to cut mine to get the body off the frame, but i need it to put my rear body back together....sorry.
jjoyal68
Member
rear valance
Dave, no problem I'll find one, thanks any way and good luck on you' re project. Thanks JJoyal
Dave, no problem I'll find one, thanks any way and good luck on you' re project. Thanks JJoyal
MR Sixpack
Member
Hi, I wonder if you have a Rochester Q-jet whit # 7028208 original on -68.
Best Regards
Svempa
Best Regards
Svempa
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
