spark plug wire insulation

[LuckyVette]

Hi Everyone,
I have recently replaced the stock plugs and wires in my '86 4+3, and I am concerned about the heat to which the new wires are subjected. The stock wires had a black plastic insulation in spots, but for the most part, I was unable to tranfser this insulation to the new wires.
My questions: Should I worry about the high heat given off for the wires when they are close to the engine body? If so, can anyone recommmend a good type of insulation?

Thanks,
Keith

 

[oldace84]

Did you install "GOOD" plug wires like MSD at 8.5...coated or something like that...
Just so long as they don't hit high heat areas eg: headers for example should be fine.....
Good Luck
tony

 

[Robertwav1]

If you have an area your concearned about use a piece of rubber hose the length that you need and slit down the side, slip it over the wire where heat may be a problem. It'll keep your insulation from burning and it's a cheap and easy fix.

 

[james bennett]

plug wires

I put ACCEL 8.8's on my 85 and had no problems. I have the whole ACCEL ignition system also.
JIM

 

[LuckyVette]

Cool, thanks for the advice!