The Mod "March's" On... Pulley Mock Up..

[Viet Nam Vett]

I installed my March Pulley set today as a Mock up for a test fit. I mounted the New Power Master Alternator on the March bracket. All fit well. Although the instruction sheet was very Poor.

In fact...It wasn't really an instruction sheet ...just a line picture or drawing of how it mount's looking at it from the front. One of the brackets was shown in reverse and would not hook up the way they had pictured it or drew it. I had one extra part that wasn't shown on the sheet. An Idler pulley with a long bolt and a 2.5" spacer. Ah........ok which bolt hole does this mount in.

After calling March the Dude said..... I'll Fax you out our new instruction sheet showing where that pesky pulley mounts in about 15 min. I said ok..... and after a second call ....40 min later it arrived.

Now.... :lol: :lol: ..the new instruction sheet was the same sheet I had except drawn in on the sheet in Black Sharpe by free hand was this circle where the idler pulley mounts and the old belt posistion crossed out and the new belt posistion shown... :lol: :lol:


I had more paper work on Warranty info (4 sheets) then I did on instruction sheets...Yeah.... CNC Machined.. Billet Powerder Coated Pulleys.......$10 Million Bucks.... Instruction sheet for above $.03 ..

:lol:

 

[richscorvettes]

Looking good! Looks like things are coming together. Just watch for the hood clearance.


Rich Lagasse

 

[Viet Nam Vett]

Looking good! Looks like things are coming together. Just watch for the hood clearance.


Rich Lagasse

Thanks Rich,


Yeah...with my luck I would have just slamed the hood shut...!!! Owcccccchhhhh.......!!!!!!!

Thanks for the heads up..or Should I say Hoods Up..!!! :L

 

[IH2LOSE]

Mark who did you get the system from? I am still shopping for the best price on one.

 

[henny496]

engine

Hi Mark
Your engine bay looks very impreesive with the set up. I am looking forward to seeing future pics as it progresses
take care
Tom

 

[67HEAVEN]

Mark,

You are so spending the President Franklins. Cha-ching.

Just put it together, would ya?

 

[Viet Nam Vett]

Mark who did you get the system from? I am still shopping for the best price on one.

Don't tell the Part's Vendors.....March will sell you direct....just ask for the discount off the list. Bought the whole sha bang from March.

 

[Viet Nam Vett]

Hi Mark
Your engine bay looks very impreesive with the set up. I am looking forward to seeing future pics as it progresses
take care
Tom

Thanks Tom,
It's going slow but sure...will keep th pic's coming..

 

[Viet Nam Vett]

Mark,

You are so spending the President Franklins. Cha-ching.

Just put it together, would ya?

My objective is to put more money in the Under Hood Doo Dads ... and Thing A Ma Gig's and Chrome & Anodized.... Choh-Keh's ....Then you have in your paint and stretched fendor well's and $4000.00 Air intake system ....

This takes more time as I have no idea as too what or where to put the next Doo Dad or Thing a Ma Gig ........... :L

 

[67HEAVEN]

My objective is to put more money in the Under Hood Doo Dads ... and Thing A Ma Gig's and Chrome & Anodized.... Choh-Keh's ....Then you have in your paint and stretched fendor well's and $4000.00 Air intake system ....

This takes more time as I have no idea as too what or where to put the next Doo Dad or Thing a Ma Gig ........... :L

A set of racing seats, 5-position harnesses, 20" rims and LED lights all around. :eek

 

[Viet Nam Vett]

A set of racing seats, 5-position harnesses, 20" rims and LED lights all around. :eek

And a 5000 Watt Sound System...and an NOS system..

 

[BarryK]

Mark

don't forget the plaid seat covers, curb feelers, big K40 whip CB antenna, draft beer handle shifter, and extra tach mounted on the hood just in front of the drivers position.
Forget the 20" rims, you need to go with at least 22" rims with the spinners in them.
Glad you mentioned the 5000 watt stereo - you will need the power to hear the bass go BOOM, BOOM, BOOM with the four 15' subwoofers.
Can't forget the neon lights under the car, around the license plate, and in the engine compartment.
Those fake chrome rocker panels that you can get with your name on it would be cool to add to the car also!

 

[richscorvettes]

My objective is to put more money in the Under Hood Doo Dads ... and Thing A Ma Gig's and Chrome & Anodized.... Choh-Keh's ....Then you have in your paint and stretched fendor well's and $4000.00 Air intake system ....

This takes more time as I have no idea as too what or where to put the next Doo Dad or Thing a Ma Gig ........... :L

Yup, figure a few bucks for the fancy valve covers, polished radiator, braided radiator hoses and air cleaner. Oh, and don't forget the billet thermostat housing.....

Rich

 

[Viet Nam Vett]

Yup, figure a few bucks for the fancy valve covers, polished radiator, braided radiator hoses and air cleaner. Oh, and don't forget the billet thermostat housing.....

Rich

Oh....Boy....I might as well leave the body off and make a " Kevin McKay " Driving Chassis out it...

Can't forget the neon lights under the car, around the license plate, and in the engine compartment.

Yeah.. I think of all the Mod's that would be my Favorite...