Thing under glove box keeps falling down

[Blade]

I have tried adhesive Velcro but it does not stay put. Any ideas?

 

[theblackvette]

What is it?

Is it packing?

Maybe cut it off?

 

[Blade]

It covers a piece of metal.

Go take a look at your Black Vette, BlackVette, you should have one of these too.

 

[MM-C5]

I have tried adhesive Velcro but it does not stay put. Any ideas?

Try this:

 

[Blade]

Try this:

Thanks MM-C5 but that didn't work either

 

[Blade]

UPDATE:

They fixed this "Damn Thing" while I had the vettte at the dealership to have the rotors repainted. Do not know what they did to it and not planning to pull it down to find out, all I know is the Trim Shop fixed it.

 

[MM-C5]

UPDATE:

They fixed this "Damn Thing" while I had the vettte at the dealership to have the rotors repainted. Do not know what they did to it and not planning to pull it down to find out, all I know is the Trim Shop fixed it.

You took your car to a dealer to have your rotors painted??!! (can't find one for Shame On You)

Good thing they fixed it though b/c my next suggestion was a 2x4 cut to size and wedged between the tunnel and the door but, high under the dash so it wouldn't interfear with passenger legs. Couldn's spare the JPG space for an installed item...need the space for Comments From Iraq

Tom

 

[Blade]

You took your car to a dealer to have your rotors painted??!! (can't find one for Shame On You)
Tom

The dealer can fix their screw-up at their expense:

http://www.corvetteactioncenter.com/forums/showthread.php?t=50909

 

[MM-C5]

The dealer can fix their screw-up at their expense:

Now I see the problem! You have the wrong dealer. Try Stewart Chevrolet - Cadillac, Colma CA. They can fix it "Good as new."

 

[Blade]

Now I see the problem! You have the wrong dealer. Try Stewart Chevrolet - Cadillac, Colma CA. They can fix it "Good as new."

I was thinking of taking it to Anchorage Chevrolet if this does not work.