Torque specs

[avacorvette]

Anybody know the torque on the sway bar (rear) attached to the cross member?
I put an exhaust system on.
Thanks

 

[68Roadster]

avacorvette,
I'll quote from the '04 manual:

1. Tighten the stabilizer shaft insulator clamp bolt(s) to 49 ft lbs
2. Tighten the stabilizer shaft insulator clamp nut(s) to 70 ft lbs
3. Tighten the stabilizer shaft link nuts to 53 ft lbs

Hope this helps, if not let me know.

Cee

 

[avacorvette]

Thanks
I'm gonna try that tonight.