Welcome to the Corvette Forums at the Corvette Action Center!

Turn Signal lever

Antz81

Well-known member
Joined
Dec 21, 2013
Messages
936
Location
Auckland, New Zealand
Corvette
1981 4 speed
Took the vette out for a drive and my turn signal lever broke off.
How much work is involved in replacing this? How was it attached? is there anything else i should look at doing at the same time?
I was planning on replacing the steering wheel and horn button assembly at some stage anyway to get it back to original. I'm guessing now would be the time to do this.
20140406_200935.jpg20140406_182619.jpg
 

chuck

Well-known member
Joined
Feb 7, 2001
Messages
193
Location
Tallmadge,Ohio
Corvette
1977 Dark Red Coupe/Buckskin 04 Spiral Gray/Gray
Try a a small pair of needle nose pliers grab on to the broken stem and pull straight out.
 

Antz81

Well-known member
Joined
Dec 21, 2013
Messages
936
Location
Auckland, New Zealand
Corvette
1981 4 speed
Try a a small pair of needle nose pliers grab on to the broken stem and pull straight out.

So it just pulls straight out?
Easier said than done. The stem has broken off flush. If I was to drill a small hole for a screw would that damage anything?
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom