Recent content by Jagdpanzer

Looking for a LT5 ignition module, GM part# 1103841, to complete a 402 CID stroker build.<!-- google_ad_section_end -->

My 94 ZR-1 with 18" Fikse Profil 10s and lowered a bit

Hi Tom, You know these wheels and tires are crying to you to be turned loose on those long open roads of SW Kansas I used to roam when I was a kid growing there. Have a happy New Year. Phil

Wheels & tires are taken. Thanks for the interest.

Wheels & tires are taken. Thanks for the interest.

Had a similar problem on my 94 Z: Bose LCD Display and Back light Won't Go Out - ZR-1 Net Registry Forums

A friend of mine in Maryland found the green label one I was looking for. Thanks everyone for looking.

bump

Looking for one 93-96 left front low tire pressure sensor GM PN 10161856 This is the one with a tan plastic case and green lable. Please PM me if you have one available. Thanks

Here are some pics of a 1/4" drain hole I put in during the 4.10 gear install I did last year. I used a anodized aluminum allen socket type picked up from the local speed shop.

Here is a neat web site where you can visually compare various wheel diameters, offsets, and tire sizes: http://www.bigcustomwheels.com/info_specs.jsp

The 94 ZR-1's 2.2 liter cylinder displacement advantage would eat the F355 alive on the drag strip and more than hold its own on a high speed oval track. However, I believe the somewhat lighter mid-engine F355 would have the edge on a tight road course especially the later paddle-shift automatic...

If it is from a 94 C4 a Dana 44 with 3.45 ratio you should have 605491-3 stamped on the bottom of the case along with the part list number 101638872, gear ratio, ring and pinion gear tooth count and date of manufacture. Where where the numbers you provided located? Here are a couple of...

<HR style="COLOR: #d1d1e1; BACKGROUND-COLOR: #d1d1e1" SIZE=1> <!-- / icon and title --><!-- message --> http://i134.photobucket.com/albums/q105/Usa1-Zr1/HPIM2049.jpg I was looking over the photo of USA1-ZR1's super clean underbody of his 93 Ruby and noticed his had spring protector covers...

Looking for a pair of five spoke A-Mold 17x11 ZR-1 wheels with +36mm offset. Either GM OEM or aftermarket replicas. Prefer silver painted but will also consider chromed or polished. Don't have to be perfect looking cosmetically, just straight and true with no structural issues.