Recent content by warp8

Who is the member at grandsportregistry that gives the GM parts discount. I am a member but unaware of this good deal.

I'm with you. If you validate the numbers with the manual method, you will find that the calculated numbers are a bit optimistic.

Thought I would close this thread with a report. I put in a Crane 114132, longtube headers, true duals, some light plenum and cast iron head porting, and a custom prom. Seat of the pants shows a definite performance gain. It will light up the tires from a standing start. I did learn one...

My 86 700 R4 stays where it should till the engine can't do anymore. 155MPH.

Corsa Power Pulse Anyone have experience with this system? Does it truly eliminate resonance as it claims?

Thanks Jeff. I tend to agree. I just want a little louder than stock under WOT but I don't want to hear it much at cruise. I think I will talk to the folks that make them. Which Magnaflows are you using. How is the resonance at cruise?

Has anyone used this exhaust on their LT4. If so, I would be interested in reports on interior noise and resonance at cruise. I want the rumble at idle and the wail at WOT but want to be able to hear the stereo at cruise. Yea, I know. I want the best of both worlds.

I sent those back and had mine cleaned and tested by witchhunter.com. They flow test them before and after and did a great job.

The problem I had with the ones I got from Five-O was the length from O-ring to O-ring. The locking clips also did not fit. When I installed them in the rail and put the rail on the intake, they would not seat fully. Bruce tried to tell me they would work but I didn't buy it. If` the clips...

Did you order them from Five-O? Beware if they are the Ford injectors. They are shorter than the stock Bosch injectors. I didn't like the fit and returned them.

Curious as to why trickle charger is not an option. Can't you remove the battery and put it on a bench. Any battery will go dead if not used for 4 months. Better to charge the battery than jump start. Use that as a last resort.

My flowmasters with headers and true duals do not resonate but they are a bit loud.

I had trouble with display going dark with the turn signals on. Resoldering the pins, even though they looked fine, fixed the problem.

Does the 200 MPH have to be on the ground? I've been Mach 1.6 in the air.

Last Try!! Power to the MAF via the Purple wire 993 at terminal E comes from one place -through the MAF Power Relay Terminal A. I don't think you are running the Code 33 chart right. The MAF should not have power at terminal E after the Burn Off Relay has done it's thing. The burn off...