Search results

Whoa buddy check the other 3 man LOL imagine that happening at 100 Mph. Now EXACTLY describe what was still with the wheel when it came off. Was it 1/2 of the bearing and the other 1/2 was still on the hub? (your missing a VERY large bolt here) Fill us in or better take pictures! LOL

Im going to go brakes on this to. Now you do have an automatic so lemme ask you this. Have you accidently or recently put your E.brake on? Think hard it matters! LOL When cars get old metal corrodes etc.. your E.brake cables are probably seized and by using them all of the sudden they...

If my car wasn't under 6 feet of snow I'd go shoot some pictures. I drilled a hole right beside the power window switch. Installed a round red button switch then took the pink wire and a ignition power wire (from the radio harness) and joined the switch Works great. Also my paging alarm...

I have the 1133 CFM Dynomax Welded SS mufflers which are actually higher flowing than the stainless (These are the highest output Dynomax makes) I Love Em! The Magnaflow however will be my next exhaust simply because of the looks of them. They do a wonderful job with double rolling and...

If replacment isn't a option I agree with JeffVette powercoating is king and probably cheap considering the size of the piece. Then just reseal them

?? High is a GOOD thing!! Now you can get underneath it and work! But a few of the others are right, those combo jack/jack stand boxes should come with four stands. Go get two more and throw them in under the frame of the car. When that is done that car should be safe enough to get in and...

Take a 12V standard auto light bulb and solder or clip two wires on the terminals. Now you have a NOID. disconnect your injector (4 cylinder has only one) (six cyl just pick one) Stick the other ends of the wires into each terminal of the injector plug. Have a friend crank the engine. If...

Ken's right there will be a sock filter on the pump which you pbly would have NOT gotten just by buying the pump. (Later model GM's have em not early) Next is follow the fuel line ALL THE WAY from the tank. Make sure you are not leaking anywhere. Your going to run into the filter now...change...

Do you have a K&N filter is my first question. Second yes the MAF being unplugged creates a load of problems which will result in stalling. Is there another relay with the same values as the pwr relay in the box. If so just try one of the others (switch them) see if it makes a difference.

Ive been out of the "mix" for awhile so Hello and Merry Christmas/Happy new year. My question is there going to be anything REALLY different that sets this Vette aside from all the other same classed sports cars out there? Is there any thought of a AWD? Are they ever going to go back to OHC...

Go to your GM Dealer they stilll carry the part #. I paid 14 bucks CAD

I loved the line " A special jig will hold the parts together!" ROFL GM ;LOL ;LOL ;LOL

Thanks bud I kinda thought that all the glass was the same. Buddys had it at his shop for 3 days he'll get it Im sure but I sure need to get it quick I have a body shop appointment on Monday!

Chris I thought you had a 85 there. Whats with the centerbolt heads? Are they off an 86+?

Having a bit of a dilema! Had my car vandalized....again but anyways all they did was smash the drivers window. Now I bought the new glass and went to have it installed (I got NO time) Now the owner is a friend of mine and he is having major difficulty getting this thing to line up! He's...

Rrubel Mine doesn't make any noise at all! Are you sure yours is ok?

Not to put down anything but Ive have heard through the pages here the Ram Clutch is junk. I think it was 69myWay who put it into a 90 and it fell apart at the track for him. (lots of cuss words) I have the Centerforce Dual Friction and yes it is a "standard" clutch system. It is also a direct...

ya know if Ive never seen your setup before Id say Ignition Module but now I am LOST!! Keep on tinkerin you'll get it. :beer

Just give me a week or two. I'll get my RMA amp back and complete the installation (Or reinstallation) The gear Im using is a TAD smaller and lower end but WTH right. Panasonic 5 Volt deck Pyle 2 channel ethernal Pyle 4 Channel ethernal (the RMA one Grrr) Alpine Component's ( 5 1/4 ) JL 3 way...

Finally! My cup of tea! Ok here we go! First I have an 85 and your interior is different so understand the differences and apply the info. Im not sure where your door speakers are but on ours there is a large bose box in the door....remove it see ya tommorrow LOL Now in place of the box...