Search results

I don't have much room at all in my garage, and I don't want to find out the hard way that I don't have enough room to pull the engine and trans together, so I am thinking about just pulling the motor by itself. My plan is to unbolt the motor from the transmission, slide the engine forward...

Title says it all. Thanks!

Car is a 66 convertible. All I have is a box of bolts, rubber cushions, aluminum spacers, and shims; I don't have any idea how they all came apart--I didn't do it myself:W I know I will have to play around with the number of shims, but what confuses me is the location of the cushions, and why I...

My 69 came with old unilug aftermarket wheels on it; and they are coming off before the car ever sees the road again! Can I use standard 15x7 or 15x8 standard old junkyard black GM rims on the car and not have any clearance or offset issues? Will they look right in the wheelwells? I have a...

Looking for used seats, door panels, and a RH dash panel. Probably more stuff as time goes by and I begin to check the car out more. Missing quite a bit of odds and ends. Prefer saddle, and would probably consider other years too. Car will be a driver after I put it back together. What do...

Over the last couple years, it seems like I stumble upon information on the net implying that there is a difference between these windshields. Is there? What is it? :confused

Hi guys, Changing the horn button on my 85 today, and when I removed the old button, before I could grasp the wire and spade to separate them, the hollow tube which grabs and holds the spring loaded wire fell apart. Old brittle plastic, I guess.:bang Now I can't keep that wire in place...

Hopefully a simple one, guys.... I replaced the drier this weekend, and am recharging the system. Have lost 3 cans of 134 due to a major leak out of the hose/pipe fitting coming out of the drier going toward the firewall. Fitting on the drier is tight, not cross threaded, and doesn't appear...

Second time buying from Bob, professional and fast. Interesting website too! Two thumbs up:upthumbs

Looking for one for my black DD 85. Condition of paint or color unimportant. Just thought I'd ask before calling one of the vendors. TIA, Joe

Hi guys, I over here from the C4 section. I was at a buddy of mines who has always been a solid axle guy (me too but....) Anyhow, he always has a couple of them he builds. He just bought a 57 body, complete with interior, rough and unrestored. Was parked in 63 and has 34,000 miles. Turned...

Hi guys, I am looking for a decent used leather graphite grey lower seat half. Not a sport seat; don't need track. Just want a used one, wrinkles and all, to match up with the rest of the seats as long as its not ripped. Also, rear grey carpet. Mine looks like it melted in front of the...

Hi all, I have an 85 coupe, automatic L-98. Do not have the electronic heater/ac controls, just the standard lever and vacuum setup. My question is this: Does anyone know if this is the same or similar to other GM setups? I have several chewed vacuum lines behind the controller:bang (mice), and...

Hi all, I have been reading many posts here for a while now, and love the site! Learning a lot! I had a '68 conv. which I sold about 8 yrs ago and now I have an '85 auto coupe which I bought about 9 months ago and love it. The car has always had a funky smell which could not be masked well...