After many hours of searching, found my cable and servo. Installed, adjusted and took the transducer completely apart cleaned and lubed reassembled and walllla it works great, holds the exact speed I set it at. Finally the last piece of the puzzle. Found a Nos servo so hopefully many years of...
I appreciate any and all ideas. I have been researching this for 2 years now. I can fabricate something but I'm trying to keep it original if possible.
Yes, its not reproduced by anyone because it is a one year only thing. I have called every corvette junk yard in the US and Canada that I could find, even the one times one was located it was junk and the rubber was torn or missing, clearly wont hold vacuum, I have been after this for two years...
Thank you. Yes it is one year only and for corvette only. I have been looking at yards, e bay, forms for over a year. I will keep the search going. Thanks.
Hello my fellow vetters, I am in need of a cruise control cable and diaphragm for my 77. Or does anyone know how to convert or make one from other years and piece it together. I have been on the hunt for quite sometime and still no luck.
Sorry for the delay. Thank you all for the advice. here's my problem, unfortunately I do not know anyone with the r12 manifold set. Mine will work but I need a adaptor that screws onto the high and low side ports. low side on the compressor and high side on the accumulator. Your correct that...
I have a all original 77 L82 that the ac is not working. I was able to score 3 cans of r12 ac refrigerant. I have manifold Guage set that is compatible with both r12 and r134 systems. However the adapters will not screw onto the fitting on the back of the compressor. The fitting is to close to...
I am not just dumping a can in, I pull it under a vacuum to check for leaks than fill it through my manifold gauges, I need to know what adaptors people are using?. I bought a set of 134 a adaptors so I could fill it correctly but they interfere with the bracket that holds the compressor in...
I am somewhat familiar with a/c systems. i want to keep mine r12, I actually have r12 cans of freon. my manifold gauges will work with both r12 and r134 systems. i just need to put the correct adaptor on my compressor (low side) so my manifold hose will hook up to it. the r12 fitting that has...
My 77 has a am GM 8 track digital radio in the dash. Does not work. After removing it appears the wiring has been patched. Is it possible the first owner tried to install a later model stereo in the car and couldn't get it to work. The radio has 3 plugs blue,black, white, the speakers have on...
I found the problem. This may help others that have the same issue. First thank you Tom for the advice without it I would not have found the problem. Upon taking the rear all apart noting the shims and locations. After Tom's suggestion I looked further and took some measurements. Here's what I...
Is there any chance the movement can be caused by the rear end? I'm this far into it. If there is I will take out the rear end now vs after it is all back togather. Thank you for all your advice so far.
Thank you. I will look tonight. ok I took my rear end completely apart. I took the calipers, brake lines, shocks, strut rods, rear spring, and the trailing arm assemblies off. I noted where the shims go also. I took a lot of pics. I bought the car mainly restored. The bushings all look to be in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.