Search results

I tried to take the g104 grounds off to clean the up, but can't seem to get a tool in there to get that nut loose. I also pulled the starter enable relay and tested that seemed ok, even swapped it with the relay next to it but still no start. I measured the resistance on the key and at the wires...

I was at the g104 ground, everything looked ok but I'm going to take a second look. Shouldn't there be a ground braided strap exactly opposite of g104 on the passenger side?

The only problem with that is the instrument panel isn't lighting up either but the DIC, radio and lights work.So, I don't know if the instrument panel and the no start are related.

Where the relay is located makes it very tough to see which wires go where, is there a way to test it out of the car?I've read through most of vats threads from what I understand is the restance at these wires should be within 4% of the keys but when I actually get to the car I get lost ( don't...

How do you exactly test for the VATS resistance at the ignition? Also i got to the starter enable relay is there a way to test that?

I do get nothing when I turn the key, the dash is blank also, so the security light doesn't flash and there is no chime.But the DIC, the radio and courtesy lights all work, (It's like half the car is dead) I cleaned all battery terminals and connections and measured 12v from battery+ terminal to...

I was under the car cleaning the grounds and checking for loose wires(with the battery connected). While I was cleaning off the starters S terminal with a wire brush I got sparks and the solenoid started clicking, Is this a short? I attache a jumper wire from the battery + terminal to the...

I have a '93 w/automatic, the car sat for a while I recharged the battery but still would not start just click at the solenoid. I got a new battery cleaned the cables car started once and now the solenoid won't even click. The lcd area now does not light up. I don't know if the two are related...

Anyone know where I can locate an original seat cover for a 40th anniversary drivers seat. All the repros are sold in pairs anyone know where to find just a bottom. Dealer tore my seat and won't stand up.

Mine just went on my '93 with 73K. Dealer banged me for $2,300.

I have A -93 with auto at idle the engine revs on its own as the car wan'ts to take off on its own. Anyone know what could cause this?

You are right about the the stop/haz fuse. The fuse keeps burning out every two weeks or so.I checked all the bulbs they look ok. Do you know what could keep blowing this fuse?

I have '93 coupe and the brake lights do not work, the tail lights work fine. I changed the 2 switches and the brakes still don't light when the pedal is pressed. Anyone know what else could be wrong?

Maineshark, Who makes those headers? I want to put the factory style side exhaust on my car.

Ol Blue So do the headers actually flare out to meet the sidepipe?

re sidepipes w/headers That' a nice car Ol Blue the color and the pipes beautiful. Always wanted one. Definately gotta put sidepipes on. Got another question about the routing of the ehaust pipe where the pipe meets the header is there any kind of odd bend to get the two to meet. I' m concerned...

re headlight support I just worked on the same problem. The header bar was hanging off at each corner. It looked as if someone in the past had tried to glue it back but didn't hold. The header bar it riveted to a bonding strip and is the glued to the nose. What i did, since I'm already in the...

Thanks Ol Blue,Would that be part # 68280-6? Did you have to make any modifications to the fender skirts or exhaust pipes?

Anyone know of a header that can be used with the 69 factory side exhausts? I have the Hooker sidemounts but prefer the look of factory pipes. Also which would be better performance-wise? Thanx!