My 2003 C-5 has 2 tanks 2 pumps & 2 float assembly's , there is a cross over tube tank to tank
Hib Halverson has some good tech tips also
GM Parts had only one side pump/float in stock cost near $1K for it no other stock available in the future
There are a few after-market manufactures that make the replacement float/pump plus it looks like the prices dropped a little since I looked Carid is one of them
https://www.carid.com/2003-chevy-corvette-fuel-pumps/
I hate to say GM Parts only had the left side float/pump
the right side is no longer in stock and if you find one get
Try adding 2 bottles in low tanks to allow for mixture to get into both tanks
Mine lasted 1 year and started to stick again so I just added 2 bottles as it will sit over the...
copied from How the C5 fuel tank system works...
C5 Corvette has two fuel tanks, left and right hand. The left hand tank contains the electric fuel pump that supplies fuel to the engine. The right hand tank has a pump, which transfers fuel from the right tank to the left tank. The pump in the...
I had the same problem on my 03 Chevron gas has the chemical in their gas or use 2 cans Textron (Made by Chevron) to start with gauges started to work after 1/2 tank only one other gas manufacture has it in their gas I think it was Shell , got Textron from O'rileys
next thing to go mite be...
I would put in a 185* thermostat, the coolant needs to sit in the block longer to pull off the heat, also get some good aluminum duck tape and seal off all the front end /motor compartment. Royal Purple Ice coolant additive will help.
I painted over with black paint, made big difference with...
I know this is an old post but my "T" top just got broken, here is a place that has all the differant styles, Manufacturer of Corvette glass t-tops & transparent roofs GM licensed
Good work on the speed of the job.
On the setting of the stiffness on the bolt hole I have mine on the second hole going outboard from the inside and the spring set high for a firm yet soft ride, soft bounce if to soft.
Handles real great, hope this may help you out on the first settings before...
I just had the system put on a few months ago, what a differance in the ride. They say from VP&B it takes about 3 hours for the front end (it was) With alignment I paid $285 for everything, front & rear. BUT I had it at my friends shop and he only had his mechanic work on it when he was slow. I...
Quote: nor is there an improvement in the car's handling from installing polyurethane powertrain mounts. Iif you decide to install them, understand that there will be an increase in noise and vibration from the engine to the chassis and then to the interior.
I guess I should establish...
Here is the reason the plant tours are cancled. The Cadillac XLRs will be built in the Plant along side of the Vette, the plant is under construction along with training the operator's on assembly of the new car and updates on the new Vette.
FOR RELEASE: September 30, 2003
Limited Edition...
IM talking about a regular Vette with more than average HP. Urethane is the only way to go an any type of car or truck.
To Mr. Hib Halverson
I was explaining what I had to USE ON MY CAR for motor mounts.
I have a little more than average horse power with a small block 427 motor, there is not...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.