Search results

Hey Guys I just decided on this years seminar presentation. I think this year I will hold an open question hour covering the topics of the last 3 years of seminars: Steering boxes, IRS including diff's, posi tuning, rear bearings, 1/2 shafts, strut rods, etc. So if you are planning on going...

Hi Guys I will be working with Carlisle Productions again this year to bring you the very best in custom building seminars. This is we have planned a big one, Differentials, Posi's, Super 10 bolts, and 12 bolt conversions. 8/25/12 noon to 2:00 pm hope to one and all and have a good time. I'll...

Just a reminder the C2-C3 Trailing Arm seminar will be on Friday 8/26 at 11:00 am in building R. I'll cover rebuilding,mods,and machine work as I do these. This is 1 hour long and is free. You won't find a better deal, same type of seminars easily could be $50-$75 per head. Stop in and say hi...

I have a used 80-82 Dana diff I bought in a package deal. I did not rebuild r use it. It appears to be in pretty good shape but I would replace the bearings since I don't know the history on it. I don't rebuild these so I'm just going to sell it. I have the 2.87 gears that were in it as well...

Hey guys, FYI, I'll be working with corvettes at Carlisle this year to present a seminar on c2 & c3 Trailing Arms. If you plan on going let me know.:beer

I have a car set,front & rear for $140 + shipping or pick up in CT. These are new in the box, have the rivet holes,made in China. Nothing wrong with them I just need to clean out parts sitting on my shelf. Gary

A lot of parts are gone now. Still have some. If you need somthing let me know. I think the alt bracket sold at Carlisle for $40. Didn't have the buzzer

Hi Guys, Just want to let everyone know I'll be holding a box tech seminar this year at Carlisle. I will be going over adjustment to overhauling to blueprinted boxes. I think if you plan on attending Carlisle this will be a great seminar so stop by and hang out.:upthumbs

As requested I have agreed to link my threads from DC over here so they can be used to help other corvette owners. These are geared toward the DIY'er corvette owner who may want to take on a job or just know how they can be built other then stock configurations. Some of the procedures I...

Hi Guys, I detailed this on another site but figured some here may want to take a look. http://www.vettemod.com/forum/showthread.php?t=2090

I have one blueprinted 67 box. Can be used on 63-68, fine spline input,iron cover,correct lower seal, new gears. This is the best built box on the market, I should know I fixed many of the others! LOL $540 + $75 core. Your core should have good gears otherwise it's only worth $20.

I'm building my son a 411 diff with all the HD goodies, Steel cap, solid sleeve, 10-17 spiders,new posi case that's polished with tuned solid steel clutches, ARP RG bolts, and got to the pinios seal and had to machine it to fit. I mentioned this on the threads where I have all the procedures and...

I have started this post if any of you guys are interested. http://forums.corvetteforum.com/showthread.php?t=1359359

Hi guys, I have one of these to build and sell if anyone is interested. Gary http://www.corvetteactioncenter.com/forums/showthread.php?t=81331

Hi Guys, I have just about caught up with the winters rebuilding jobs and have a complete differential that I'm going to blueprint and sell. I can set it up with new gears of your choice: 273,308,336,355,373's All Tom's gears. The housing has already been blasted,POR15'd and tapped for a drain...

I found a couple of bad sets of Timken cones during a rear bearing rebuild this week. Just passing the info along in case anyone here is doing this job. I used a set of Timkens from a different source and they setup fine. Be sure to check endplay a couple of times before final fitting and...

I've been running a differential rebuild post on another site under my same name. The point is I found a odd problem doing this rebuild that you should be aware of if you're going to rebuild your differential and posi. Rather then post all that info and pictures I'm sure those interested will be...

Hi Guys, I'm documenting a differential rebuild on another site. It is similar to the post I ran here on rebuilding rear bearings. I don't think I offered it here,so if there is interest I'll put up some pictures for you to use with the paper I wrote on how to do the job. Just let me know if...

Thought you guys might be interested in this too. Gary http://www.corvetteactioncenter.com/forums/showthread.php?t=76896

Hi everyone, I have been reporting on another site about rebuilding T arms and have been asked about it here in the past. I figure I'll post some pictures for those interested to see how I do the job or to see what's involved if you're thinking about doing it yourself. Let me know what you think...