Welcome to the Corvette Forums at the Corvette Action Center!

1984 dash cluster

T

thomas

Guest
Can someone tell me if the two wiring harness plugs on the upper right side of cluster are just pushed in or are there clips.I'm trying to remove cluster but don't want to break the plugs.They are a very tight fit.Thanks.:cool
 
I just did that a couple of months ago, and I believe they were just pushed together, not clipped. It is a tight fit.
 
1987 Z51 said:
I just did that a couple of months ago, and I believe they were just pushed together, not clipped. It is a tight fit.

:L Ha! That's a good question.....I had to do my '85 and I thought it was clipped. I might be wrong though:confused

Jay
 
Am I gonna hafta go back out and tear my dash apart again?!?!! :L
 
Just did the same job last weekend, I used a small screw driver to pry off the clips. On one side there are also metal clips pry off the part that is close to the cluster first. Good luck.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom