Welcome to the Corvette Forums at the Corvette Action Center!

2001 Z06 alignment

Hib Halverson

Technical Writer for Internet & Print Media
Joined
Jan 10, 2001
Messages
13,458
Location
CenCoast CA
Corvette
71 04 12 19
Forum members-
Perhaps a little known service fact about the Z06 is that it has different alignment specifications than all other C5s.

Through an unfortunate error, the 01 Corvette Service Manual does not contain the proper alignment specifications for the Z06 and, up to now, GM has not provided the proper specs to dealers through the TSB process. That may happen later this year, but until then, the proper alignment specifications from sources in GM that deal with Corvette service issues are published below. The 02 Manual will contain these specs.

Front Individual Toe +0.04 degree +/- 0.10 degree

Front Sum Toe +0.08 degree +/- 0.20 degree

Front Individual Caster +6.9 degree +/- 0.50 degree

Front Cross Caster within +/- 0.25 degree

Front Individual Camber -0.70 degree +/-0.50
degree

Front Cross Camber within +/-0.25 degree

Rear Individual Toe -0.01 degree +/- 0.10 degree

Rear Sum Toe -0.02 degree +/- 0.20 degree

Rear Individual Camber -0.68 degree +/- 0.50 degree

Rear Cross Camber within +/- 0.50 degree
 
Hib,

Thanks much for the information.

I have enjoyed and found useful numerous articles you have written for various print publications over the years.

Ray
 
Hib, where can I find the alignment specs for my 99 C5?
Herbie
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom