Welcome to the Corvette Forums at the Corvette Action Center!

63 A Front Suspension finishes

BLACK MOON

Well-known member
Joined
Oct 21, 2003
Messages
654
Location
KNOXVILLE, TN
Corvette
15 Shark Grey 3LZ Z06
Can someone clarify the finishes on a 63 front suspension? I see on page 139 and 140 of the NCRS Judging Guide where it addresses steering but do not see: A Arms, a arm shafts, bolts/ studs, bushing retainers, ball joints, lower nut plate and so on. Did I miss it in the judging manual or is there some other reference that adresses these areas in more detail. I posted on the NCRS board but no help yet.Thank you in advance for your assistance.
 
In the '67 JG, that's all covered in detail (including finishes) under "Front Suspension" in the "Chassis" section - take a look in that section.
:beer
 
I'm in the 63-64 and finally found it but it wasn't under suspension, it was under "ENGINE COMPARTMENT" of all places. At least i found it.



JohnZ said:
In the '67 JG, that's all covered in detail (including finishes) under "Front Suspension" in the "Chassis" section - take a look in that section.
:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom