- Joined
- Jan 12, 2004
- Messages
- 424
- Location
- Lakeside in Monmouth, Maine
- Corvette
- 75 Stroker 4spd Frame Off, 05 Cpe 6spd
Just happened Wed night. I was comparing low beam and high beam and suddenly the lights are on only in low beam mode (low beam lamps only). In high beam mode, even the low beam lamps are out.
Upon inspection this morning, one low beam was out also. I cleaned the connections to the lamp and it's OK now (in low beam only).
I checked to see if any wires were disconnected while my foot was depressing the brake peddle and everything seems to be OK. All my other lights work.
Giggled the high/low beam lever. No difference.
Any ideas?
Thanks,
Chuck M
Upon inspection this morning, one low beam was out also. I cleaned the connections to the lamp and it's OK now (in low beam only).
I checked to see if any wires were disconnected while my foot was depressing the brake peddle and everything seems to be OK. All my other lights work.
Giggled the high/low beam lever. No difference.
Any ideas?
Thanks,
Chuck M