Corvette95
Well-known member
- Joined
- Feb 7, 2006
- Messages
- 60
- Location
- Bham,Alabama
- Corvette
- 89 Conv,another 89 Conv,96 coupe,95 coupe,95 ZR1,
Replaced the blend door actuator on my 96. Light was flashing and it was stuck on hot. Now I have MAX COLD and MAX HOT, sometimes in between works but the a/c light flashes a code 02 - temp blend malfuntion. Bought another actuator - same exact problem. Unhooked battery several times to reset. No change. Pulled the actuator out as I changed temp settings, it just wanted to go to full hot and "bounce" off the max position. CCM diagnostic in mode 34 shows 00 and -153 respectivily, mode 24 shows a little off from expected readings. I dont know where to go from here. Any thoughts?