Welcome to the Corvette Forums at the Corvette Action Center!

98C5 Removeable Top leaks

Q

quenchmasterc5

Guest
Has anyone had any experience/knowledge adjusting the windows from inside the doors to reduce/eliminate leaks. Nothing wrong with the trim. Gravity prevails somehow through that microscopic joint between the top and window seal. I was told by Corvette Masters in Orlando that their is an adjustment inside the door to move the window in/out to create a tighter seal.
Any ideas!
 

c4c5specialist

Technical Advisor
Joined
May 29, 2001
Messages
3,682
Location
New Haven, Ct. USA
Corvette
Nope, but someday.
HI there,
If you are talking of pressure from the window to the weatherstrip. Then you will need a 10mm socket, and a little time.
At the bottom of the door, you will find a rubber plug.
Under this plug, is a 10 mm nut, which holds the regulator rail.
This is your window tip in.
Have someone put a little pressure to the top of the glass, while you torque the nut, after loosening it.
Besttoyou, c4c5:hb
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom