Mad-Mic
Gone but not forgotten
ok fella's if the deals work out that i'm trying to make come through i will have a good bit of parts for sale for 3rd Gen FBody's and C4's.
i have no idea what these parts are worth but would like to get average going price for total parts. what deals i've gotten i'll pass along but i would like to defur some of the other parts costs for the current projects.
please give me some kind of idea what these parts are worth if i were to sell them.
85 TPI stock base/SLP runners/stock plenum with fuel rails. stock injectors. i think they are 20 lbers.
87 stock TPI Vette motor from oil pan to throttle body. no sensors. no accesories. 75k in miles. i will throw in the ZZ409 cam unless if i can use it on a 400 sbc setup i'm buying. i haven't did this part of my homework yet. this motor runs strong and is bone virgin stock. it does burn about a quart or so of oil between 3k oil changes due to leaky valve seals all sbc motors get. always ran 5w30 castrol syntec. is 2k good?
4 9.5 88-90 sawblades with covers very *USED*. these are *NOT* the rims that are on my car but they *ARE* the same style and make! clear coat is chipping off of them with slight road rash on 1 or 2 of them. these were going to be an extra set for drag radials but i cam upon a set of ZR1 AMolds with the 11x17". i bought these with Rich Rubel (a CAC member here) from a member over on CF. these would make a good 2nd set of rims if you drive your vette in the winter and want a beater set. for a few dollars you can strip the clear coat off and polish them out. thats what i was going to do with my 2 and they would look great! 5 feet away rims easy. 100 bucks + shipping is what we paid so 100 bucks + shipping
2 stock coils for big cap HEI. make offer.
1 pare of cast iron 86 L98 heads. used 140k miles. 50 bucks + shipping. rather buyer be in Maryland for direct drop off.
1 88 L98 Roller Block out of an Iroc w/ stock crank. would be good for a 355 rebuild or even a stroker with splayed mains. i was going to use it for a stroker build but found a 388 and a 400 stroker setups i couldn't pass up. prefer buyer be in maryland for direct drop off. 300? best offer.
10 bolt rear with disc brakes for 3rd Gen Fbody. paid 1100 bucks for rear to be rebuilt by a local race shop back in 93. it only has 5k in miles on it since the rebuild. 3.42 gears everything is fresh from insides the axles. hitting posi is not a problem with this rear! 500 bucks best offer??!?
what do you guys think? once i start doing the mods in a month or so and have all the parts out and ready to be sold i will let you guys know. just drumming up some interest i these parts for right now until they are ready to be sold. also looking to see what they are worth. i'm sure i got some other things that i have for sale but i can't remember everything. i'll have to rummage thru my basement of parts and find out.
Thanks,
Mic
i have no idea what these parts are worth but would like to get average going price for total parts. what deals i've gotten i'll pass along but i would like to defur some of the other parts costs for the current projects.
please give me some kind of idea what these parts are worth if i were to sell them.
85 TPI stock base/SLP runners/stock plenum with fuel rails. stock injectors. i think they are 20 lbers.
87 stock TPI Vette motor from oil pan to throttle body. no sensors. no accesories. 75k in miles. i will throw in the ZZ409 cam unless if i can use it on a 400 sbc setup i'm buying. i haven't did this part of my homework yet. this motor runs strong and is bone virgin stock. it does burn about a quart or so of oil between 3k oil changes due to leaky valve seals all sbc motors get. always ran 5w30 castrol syntec. is 2k good?
4 9.5 88-90 sawblades with covers very *USED*. these are *NOT* the rims that are on my car but they *ARE* the same style and make! clear coat is chipping off of them with slight road rash on 1 or 2 of them. these were going to be an extra set for drag radials but i cam upon a set of ZR1 AMolds with the 11x17". i bought these with Rich Rubel (a CAC member here) from a member over on CF. these would make a good 2nd set of rims if you drive your vette in the winter and want a beater set. for a few dollars you can strip the clear coat off and polish them out. thats what i was going to do with my 2 and they would look great! 5 feet away rims easy. 100 bucks + shipping is what we paid so 100 bucks + shipping
2 stock coils for big cap HEI. make offer.
1 pare of cast iron 86 L98 heads. used 140k miles. 50 bucks + shipping. rather buyer be in Maryland for direct drop off.
1 88 L98 Roller Block out of an Iroc w/ stock crank. would be good for a 355 rebuild or even a stroker with splayed mains. i was going to use it for a stroker build but found a 388 and a 400 stroker setups i couldn't pass up. prefer buyer be in maryland for direct drop off. 300? best offer.
10 bolt rear with disc brakes for 3rd Gen Fbody. paid 1100 bucks for rear to be rebuilt by a local race shop back in 93. it only has 5k in miles on it since the rebuild. 3.42 gears everything is fresh from insides the axles. hitting posi is not a problem with this rear! 500 bucks best offer??!?
what do you guys think? once i start doing the mods in a month or so and have all the parts out and ready to be sold i will let you guys know. just drumming up some interest i these parts for right now until they are ready to be sold. also looking to see what they are worth. i'm sure i got some other things that i have for sale but i can't remember everything. i'll have to rummage thru my basement of parts and find out.
Thanks,
Mic
