Welcome to the Corvette Forums at the Corvette Action Center!

big block heads al.

  • Thread starter Thread starter donmac
  • Start date Start date
geopar said:
Hi . Condition , date codes , price ? Thanks
these heads are as new , other than .005 remove for clean up. not sure of exacy build date as they are in storage but i know they are 70. also have block casting#3963512 has f 7 stamped inside bell housing not sure what this means block is .100 over
 
I would also be interested in the aluminum heads as well. Please let me know what price you are asking and whether there are any repairs/welds or if they have been milled or ported? Thanks, Warren
 
geopar said:
Hi again . Do you have a $ figure in mind for the heads ? Thanks , Geo
I don't really know what these heads are worth, but i have been told that 1500.00 each would be a starting point. I am in canada so supply and demand would dictate the price.
 
early shark said:
I would also be interested in the aluminum heads as well. Please let me know what price you are asking and whether there are any repairs/welds or if they have been milled or ported? Thanks, Warren
the heads don't have any repair marks on them and i haven't really examined the ports and runners for mods. the heads have been pressure tested and resurfaced only to clean up a small amount of corrosion at the coolant passages about .oo5 was removed from them. I don't really know what these are worth.
 
donmac:

If you get the time or chance to look at the dates on the heads, and they have not been modified, I would be interested in purchasing them.

Thanks, for the consideration......Warren
 
early shark said:
donmac:

If you get the time or chance to look at the dates on the heads, and they have not been modified, I would be interested in purchasing them.

Thanks, for the consideration......Warren
the head build dates are 5.20.70 and 4.8.70 other numbers on them are 5719 and 5802. Im notsure what those other numbers are but they are the only numbers different to each head other than date codes. there is a casting stamp 6 7 8 9 10 with a large E and a small g sideways on both heads close by is a 'P' with what looks like a crown.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom