Help! Cooling Fan(s) Help Needed

[jmccloud]

'95 cooling fan removal

Please give details regarding what had to be loosened, removed, etc.???

 

[CAJUN C4]

Please give details regarding what had to be loosened, removed, etc.???

We loosend all of the Radiator Shroud bolts ,a pain in the butt Then we took the right side bolts off of the fan assy' and I pulled as hard as I could the whole Radiator / Condenser forward and my friend pulled the fan assy' from the top.Not that bad just had to bend over the Radiator hose etc.It was tight but came out OK.Same procedure for the Left side as well.It definatly takes 4 Hands. And is Definatly easier than taking the Bars off from below.The hardest thing is taking off those tiny screws etc. from the shroud. Very time consuming. Just have alot of patience.

 

[formul8]

Those three little screws on the sides are a PITA. I was only able to put the bottom two on each side back in.

 

[CAJUN C4]

Your so right...I don't know how we did it.

That's really the most tedious part of the job.