DCT failure code - what is this, anyone?

[Rain]

Hooked up the vette for the first time today.
James and I took a trek down the Interstate and recorded the data to his laptop.

Here is the first read thru of the results:

I did find a DCT failure code. PO161. HO2S HEATER CIRCUIT BANK 2 SENSOR 2.

What do you guys think I have to get looked at here?
(service manuals are bookmarked on ebay)

Thanks in advance
Rain

 

[Rain]

Not trying to be impatient, But anyone heard of this?
Do I need to worry?

Thanks
Rain

 

[Rain]

Think we are gonna hook the vette up to the ODBII software again and see if the code comes up since I have had no insight here.

Keep ya posted
Rain

 

[pthoma1]

The code is for the heated o2 sensor circut. I believe that it is not seeing any voltage coming out of one of the o2 sensors (but don't hold that to me, I could be wrong) But it is definetly from one of the o2 sensors. I think that it will stay in closed loop because there is 2 o2 sensors. You could try playing with the sensors see if it changes the driveability. Also just look at all the connections. A service man. will make that much easier.


Good luck hope this helps,
Paul

 

[Rain]

Thank you Paul.
Had begun to wonder if I had gotten a Unique Code -

Will also see if it pops up later this week when we do another run with the software. I have a new battery in the vette now too.

Keep ya posted
Rain