Dome light delay

[jetmech]

Has anyone rebuilt their dome light delay circuit board? My interior lights will only work with the light switch.

 

[mvftw]

Somebody here gave me the resistor & capasitor values. I found a close match at radio shack. I have Not installed them yet (I'm scasred of blowing something else)... when I get home I'll tell you what I bought. You can still buy it from Chevy...

 

[jetmech]

Hey thanks for the answer. I would greatly appreciate the radio shack part numbers if you have them. I just built a tach filter using radio shack parts. Seems to work great. Thanks again

 

[wishuwerehere82]

I "fixed" mine by reflowing the solder on the card edge connection that the connector plugs into. The old solder was pitted and didn't make contact anymore.

 

[mvftw]

I checked mine for a cold solder joint, but they looked good. I'm going to check again...