Welcome to the Corvette Forums at the Corvette Action Center!

Help! Driver side door handle replacement ???

bhickmott

Member
Joined
Jun 7, 2009
Messages
12
Location
Newfields, NH
Corvette
1977 L82 4spd Black / Buckskin
I need to replace the drivers side (LH) door handle assembly on my 77 L82 vette. The access hole to that area of the door is quite small and the associated rods and levers for the locks and door latch further limit the access by hands or fingers.

Does anyone have some tips or tricks from previous experience for how accomplish this seemingly impossible task ?

Thanks for any advice !

Bill
 
Remove the door latch it will give more room to get your hand in there.:thumb
 
Remove the door latch it will give more room to get your hand in there.:thumb

That is how I do them too, remove the latch so you can reach up and get the nuts off the handle studs. Clean & lube the latch and adjust the throw on the rod.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom