engine block casting number

[billyvette]

I have an engine with the following block casting number 10066036 according to www.mortec.com it's a 2 or 4 bolt main targetmaster/goodwrench crate motor.

Can anyone tell me anything else about this engine without me going inside it.
This engine is in a vette can the oil pan be dropped while still mounted in the crossmember?
It runs strong, I was wondering about hp and torque?

Thanks for any replies.

 

[Robin7TFour]

BILLY, can't tell you what you have in the motor. however, dropping the pan is real easy. you remove the steering connection at the idler arm,then all the pan bolts . then oil pan comes out.that's all i had to do. on my auto trans i took the torque converter cover off for more room.

robin

 

[billyvette]

BILLY, can't tell you what you have in the motor. however, dropping the pan is real easy. you remove the steering connection at the idler arm,then all the pan bolts . then oil pan comes out.that's all i had to do. on my auto trans i took the torque converter cover off for more room.

robin

thanks for the reply robin 74, did i see something about you originally being from MS?