Welcome to the Corvette Forums at the Corvette Action Center!

found a simple cheap way to fill the transmission

VETTEX2

Well-known member
Joined
Mar 27, 2001
Messages
449
Location
USA
Corvette
86 & 99 Z51's
11uUOIqbneL._SL500_AA300_.jpg

Amazon.com: Sprayco R32 32 Oz Long Reach Plant Waterer: Home Improvement
works on an A4
I'm thinking it should work on a manual
I just used a heat gun to make the tube bend the way I needed it so it would fit.
I doubt it would work with 90wt but dexron flows easily and it worked to perfection
found one at a local hardware store for 4 bucks
 
Looks like a viable solution. :w
 
Looks to be a great solution.

We use these in our shop for drill cutting fluid.
I'll have to grab one and see if it would work.
They have the tube that goes to the bottom so you don't have to tilt the bottle.

Thanks for the idea.:beer
 
yes , the tube does go to the bottom
that is what makes it work :happyanim:
 
almost 2 qts
it holds 2 qts.
 
for the price and ease of use , it's a great deal.
it's ideal for topping off too.....
for a shop that does this in volume , it would be ok just for topping off , most shop pump fluid out of drums....
Durability would be an issue if daily use was needed
but then , it is cheap
 
parts houses has a pump that screws into the top of the bottle. and has a hose with a clip that fits into the hole. even with all that i still made a mess, i would end up wearing half of that thing.
 
parts houses has a pump that screws into the top of the bottle. and has a hose with a clip that fits into the hole. even with all that i still made a mess, i would end up wearing half of that thing.




Very true. Plus it takes for ever, and a lot of pumping (and energy) to use the very low volume pump. I like the 2qt. bottle with higher volume pump (you squeezing) action much better. ;)
 
It works great , just used it again :happyanim:
 
yep works well, i bought 2 off amazon about 5 months ago after reading this thread, thanks
jeff
 
some clown on ebay want 20 bucks for ONE :eyerole
 
parts houses has a pump that screws into the top of the bottle. and has a hose with a clip that fits into the hole. even with all that i still made a mess, i would end up wearing half of that thing.
I had one of those , I threw it away......
 
Bump:w
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom