S
steve84
Guest
can anyone help me,Trying to figure out how to remove my front blinker/fog unit,Not the bulbs but the whole light,please help.........
Ken
Gone but not forgotten
The entire bumper cover must be removed to remove the lamp assembly.
Corvette-Pilot
Well-known member
Yup, that's what I heard too.Ken said:
Guess they built the car around the blinkers !
malc350
Well-known member
yep
you do have to remove the whole bumper - I couldn't believe it when I had to do it on my 84. I had to remove the light assembly to take out a fog light bulb that melted in place! All that work for one bulb!
Worst part I remember is all the little bolts accesible through the gap between the hood and the bumper (when the hood's open). Tip here is to put a strip of masking tape on the edge of the hood to avoid scratching it with the spanner (think it's a 10mm).
you do have to remove the whole bumper - I couldn't believe it when I had to do it on my 84. I had to remove the light assembly to take out a fog light bulb that melted in place! All that work for one bulb!
Worst part I remember is all the little bolts accesible through the gap between the hood and the bumper (when the hood's open). Tip here is to put a strip of masking tape on the edge of the hood to avoid scratching it with the spanner (think it's a 10mm).
JonM
Well-known member
Hand signals are your friend...
- Thread starter
- #6
U
unleadedbrew
Guest
That's classic, Jon. Used 'em all with my '52 Chevy PU except the stop. Did have brake lights. Too many out there don't know what they are, tho. 
_Gordon
"I'll let you be in my dream if I can be in yours" - B.Dylan
_Gordon
"I'll let you be in my dream if I can be in yours" - B.Dylan
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
