Welcome to the Corvette Forums at the Corvette Action Center!

Gasket Kits

Rob

Site Administrator
Staff member
Administrator
Joined
Sep 16, 2000
Messages
13,917
Location
New Hampshire
Corvette
1990 Corvette ZR-1
ZR-1 Owners: Some of you may be interested in this below:

**************************
OK gang,

The engine gasket kits are in production now: the tooling is been made & the
kits should begin been produced in 2 weeks, so.

I will be frank here & not beat about the bush.
Since the market for the LT5 engine gasket kit is very small & there is not
a huge market for this, I will need firm commitments from everybody,
Otherwise, I will never recoup any of my investment.
Obviously the risk is mine & I don't expect you guys to pay for my business
ventures, however, I don't want to order 100 sets of LT5 gaskets & only sell
5.
What I propose is.

Let me know how many sets you want, either upper or lower.
once you know what you need, send us a check or call us up with a credit card
#, we will not retrieve any funds from your accounts, we will only hold the
checks or card numbers on file. Once the gaskets are completed & ready to
ship, I will deposit checks & process credit cards, & not before.

The price for each component is as follows:

Lower engine rebuild kit: $329.99
Consists of:

Oil seal, PCV tube 2 90-95
Seal, cylinder head cam cover 8 90-95
Seal, timing chain tensioner 2 90-95
Plug, cam shaft rear bearing hole (40 mm) 8 90-95
Gasket, coolant outlet pipe 2 90-95
Gasket, engine front cover 1 90-92
Gasket, engine front cover 1 93-95
Seal, engine front cover 1 90-95
Gasket, water pump 1 90-95
Seal, crankshaft rear oil 1 90-95
Gasket, crankshaft rear oil seal housing 1 90-95
Gasket, oil pan 1 90-92
Gasket, oil pan 1 93-95
Seal, oil pump suction pipe 1 90-92
Seal, oil pump suction pipe 1 93-95
Gasket, oil pump access cover 1 90-95
Seal, oil pump O-ring 1 93-95
Seal, oil pump O-ring 1 90-95
Seal, oil pump O-ring 2 90-95
Seal, oil pump O-ring 1 90-95
Seal, oil pump O-ring 2 93-95
Seal, oil pump O-ring 1 93-95
Seal, oil level indicator tube 1 90-95
Gasket, oil filter adapter 1 90-95
Gasket, cylinder case vent cover 1 90-95
Gasket, thermostat housing 1 90-95
Seal, engine oil cooler hose 2 90-95
Gasket, cylinder head 2 90-95
Gasket, exhaust headers 2 90-95
washers, dowdy 48 90-95

Upper gasket kit: $99.99 (Add $20.00 for Siamese plenum gaskets)
Consists of:

Gasket, intake plenum 2 90-95
Gasket, fuel injector housing 2 90-92
Gasket, fuel injector housing 2 93-95
Seal, fuel feed & return pipe 2 90-95
Seal, fuel injector (primary) 8 90-95
Seal, fuel injector (secondary) 24 90-95
Gasket, coolant outlet pipe 2 90-95
Gasket, throttle body kit 1 90-95

Top end stainless steel bolt kits: $168.74


Header bolts 1 set @ $15.20 per set (16 bolts) $15.20
Plenum bolts 1 set @ $7.56 per set (18 bolts) = $7.56
Valve cover bolts 1 set M8 X 55 @ $95.52 per set (48 bolts) = $95.52
Valve cover bolts 1 set M6 X 25 @ $2.94 per set (6 bolts) = $2.94
Dowdy washers 1 set @ $47.52 per set (48 washers) = $47.52


The same set from GM is $482.78 list, even if you get 50% off, that's still
$241.39, as you can see, our prices for the bolts are 70% off of GM's prices
+ they look superb.

Kurt.

90 ZR-1 368 Cu"
150 HP N20
4:56 gears
Blueprinted ZF


[url]http://www.whiteracingproducts.com/home
[/url]
 
Thanks Rob. That's good to know. Fortunately, I'm not doing an entire rebuild..........I just need to pick up an oil pan gasket.

Jay
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom