Welcome to the Corvette Forums at the Corvette Action Center!

Get it now, while its HOT!!! 81' Front Emblem

81' Corvette Guy

Well-known member
Joined
Nov 14, 2002
Messages
82
Location
Too Low...Too Fast...Too Loud
Corvette
1981 Silver Coupe
what a bunch of BS!!..they'll probably sell it too!
 
wonder if it's a mis type should it be $35 instead of $350??
-=Rick
 
I've heard of them selling for as much as 100.00 but not 300.

this one has been listed for several days and hasn't had any hits!!
if I wanted a nose emblem for my 81 that bad I'd buy an 80 and paint it!!!

bill:w
 
If I'm not mistaken, the ebayer making the post for the $300 emblem is the same outfit trying to sell 81 seatbelts for $785/set.

Guess he's rich and thinks everyone else is too.
I will remove mine from the vehicle and sell it for $300........
(just kidding)
;)
 
:duh I gave 2 away in the last 8 years (emblems that is) :duh both were used, but in great condition....

Sorry but I have no more left... I did get a "Thank You" from one person :eyerole

Bud
 
if that sells for 300, i'm gonna sell my NOS emblem that resides on my monitor. Don't ask to buy, i'm saving it for the final touch for when my car is complelty done
 
There is no reproduction that I know of but maybe they took the plastic inserts out of an 80, then refitted them into a refinished 81 base. I paid $50for a new one at Carlisle 3 years ago but finding them now is like buying chicken teeth, very difficult.
 
Just a simple question- Will an 80 model emblem fit into the exact hole pattern on an 81 vehicle?

I ask this b/c after owning an 81 for 2 years, looking at 80 & 81's on ebay DAILY, I can not tell you the difference in their appearance.
I know I'll get a lot of emails about the precise differences, but to me the difference is too minute . If something happens to my 81 emblem, was just wondering if an 80 model would fit without any mods. good day.
;)
 
Mike, Thanks for asking ;) I've been wondering the same thing...

I have the Assembly Manual for 1981 so if someone could provide us with a copy from a 1980 Assembly Manual we can compare ;)

Hopefully we can put this subject to rest with some help :upthumbs

Bud
 
I was told by Ecklers to use an 80 and it would fit the hood the same as the 81 but the black plastic base is a bit smaller I think and on an earlier post someone said they used solvent to remove the old plastic insert but had to sand down the 80 insert to fit the 81 base. I didn't try it or have any first hand knowledge but this is what I have read before someplace.Chuck
 
i've got one of each (emblem, not entire vette)....guess i should do some comparisons for ya
 
Hey Yoda,
Guess how many I have abd how long I have had them?
As well as the gas door emblem...
They were dirt cheap when I bought them.
All brand new in their own little bubble bags.
As well as numerous other parts, Yoda...
You seen the pics and heard the stories...
How many electric antenna's do I have?
I need to get out of this house more..

Howie...

The "POSSE"'s Brutal - Just Brutal...
 
80 vs 81

80's have chrome outline.
81's have a black outline
That's the difference as I checked it out 18 years agao.
Bought an 80 and used a black permanent marker to color the edges that were chromed.


mikejpss said:
Just a simple question- Will an 80 model emblem fit into the exact hole pattern on an 81 vehicle?

I ask this b/c after owning an 81 for 2 years, looking at 80 & 81's on ebay DAILY, I can not tell you the difference in their appearance.
I know I'll get a lot of emails about the precise differences, but to me the difference is too minute . If something happens to my 81 emblem, was just wondering if an 80 model would fit without any mods. good day.
;)
 
81 Corvette said:

This guy is such a schmuck! I just looked on ebay, and he bought 8 of them @ $50 each, and the one they have listed for $300, 'the only one I have' :eyerole The 80's are a little bigger, as the chrome edge is thicker than the black on the 81. I don't even know if I'm putting one back on my car when it gets repainted, same with the back. The new bumper doesn't have holes for the emblem, don't know if I want to put them in either. There will still be the one on the gas door though. I mean hell, if you don't know a Corvette when you see one, I'm gonna tell you it's a Ferrari! ;LOL

Craig
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom