Question: getting ready for the job

[Bentas1ent]

First let me say that all of you guys are great. You have all been so helpful getting me ready to do this job of replacing my injectors. My question now is should I replace the FPR valve as well while I am in there??? And should I be looking at anything else??? Thanks again to all of you.

 

[KANE]

First let me say that all of you guys are great. You have all been so helpful getting me ready to do this job of replacing my injectors. My question now is should I replace the FPR valve as well while I am in there??? And should I be looking at anything else??? Thanks again to all of you.

O-rings. Replace those while you are there.

I'd hook up a fuel pressure gauge and make sure I was getting the right pressure before I replaced the FPR. If it ain't broke... don't spend the money on it.


Other stuff... clean your Throttle Body while you are at it and check out your vacuum hoses to make sure they aren't leaking either.

Here's a link to a tech article I wrote a while back- lots of pics. Hope that helps!

Good luck!