Handling mods

[brewshill2003]

Okay so I am new at this. Not interested in engine mods at this point., Over my head and abilties. But would like to improve handling. I am confused, to tighen up handling what would be best? targa truss bar, camber brace, X brace underneath car, or bar that mounts behind seats. Thanks in advance for your guidance and expertise. 1996 ce lt1 bone stock 22,000 miles.

 

[WhalePirot]

I started with the poly replacing all suspension rubber. This is discussed on another thread and others prefer the rubber. I like the precision handling of the poly, due to no suspension movement. I also did the Heim joints on the front sway bar and the rear links. 16 years and counting on all that and 50k+ miles. Mine came from Guldstrand, but I installed it all.

 

[vader86]

You would notice the camber brace more than the rest.

But it would be better overall to replace all your bushings with a polygraphite set to start. Then move up to Heim-jointed stuff or a slew of stuff from VetteBrakes.

 

[tntcorvette]

camber brace, coil overs, new bushing, etc.....

check out http://www.exoticmuscle.com

also the cross bar if you do not want to get a roll cage out back nad a set of c4 beam plates.