Welcome to the Corvette Forums at the Corvette Action Center!

HELP AC question requires looking...

vigman

Motor head!!!!
Joined
Feb 13, 2001
Messages
3,471
Location
Valencia, CA,USA
Corvette
88 Convert ( SOLD ) /1973 coupe 4 speed/1964 Vert!
So STUPID me,

I just finished replacing the dryer bag & screen in my VIR (valves in reciever assy) and replaced the top gasket.. but I forgot to mark the orientation of the top to the reciever!

Of course the car is at the shop..

So could somebody take a look under the hood of their shark and guide me.

A picture or two would be nice. The factory image
is not clear about this.

The question is there are 2 large fittings on one side of the valve ( sight glass side )

And 1 fitting on the other ( Large )

Which direction is the "Top hat" fitting facing ?

I have the assy just finger tight now so it will be easy to change.

Thanks a bunch!

Mike
 

vigman

Motor head!!!!
Joined
Feb 13, 2001
Messages
3,471
Location
Valencia, CA,USA
Corvette
88 Convert ( SOLD ) /1973 coupe 4 speed/1964 Vert!
Bingo

Thanks

Mike
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom