Welcome to the Corvette Forums at the Corvette Action Center!

Help with clipping a/c compressor connector to correct location/bracket LT5 ZR-1

Corvette95

Well-known member
Joined
Feb 7, 2006
Messages
60
Location
Bham,Alabama
Corvette
89 Conv,another 89 Conv,96 coupe,95 coupe,95 ZR1,
Finishing the refurbish of my low mileage 90 ZR-1. I have the secondary installed. The A/C compressor is plugged up correctly and the connectors is in the right place from multiple photos, including my own pre-dissaembly photos . Problem is, the compressor connector has a place for it to slide into a bracket or retainer to keep the connector in place- I CANNOT FIND WHERE THE A/C CONNECTOR SLIDES INTO ? No pictures are close enough to see. Any help would be appreciated. I am at a stopping point due to this.
IMG_5232.jpgIMG_5233.jpgIMG_5231.jpg
 

Corvette95

Well-known member
Joined
Feb 7, 2006
Messages
60
Location
Bham,Alabama
Corvette
89 Conv,another 89 Conv,96 coupe,95 coupe,95 ZR1,
The concurrence was it doesn't clip in. It just lays there. That's what I went with.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Win Both Corvettes!

Win Both Corvettes and Get Extra Bonus Tickets Now!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Dead Center Foundation

Vetteskins

Advertise with the Corvette Action Center!

Partners

Top Bottom