Welcome to the Corvette Forums at the Corvette Action Center!

Help! How to re install transmission filler tube into bell housing and transmission?

L98350

Member
Joined
Feb 16, 2020
Messages
24
Location
Knoxville
Hi, I’m reinstalling my 700r4. I have every bolt hand tightened except for the one that connects to the filler tube (top right.) my problem is, I can’t get it to seat into the pan without messing up the alignment with the bellhousing. Any tips? There’s no way I’m pulling this transmission out again to install the filler tube if it can’t be done. Any help is GRE
ATLY appreciated. Thanks
 
UPDATE: got the dipstick in. It’s being a real pain when I try to bolt it to the bellhousing/engine. I have spent the last half hour trying to get it to thread in. No luck yet.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom