How to remove door trim panel on 1999

[ghfun]

I have removed the two screws behind the pull handle and removed the face plate around the locking mechanism. What next? Someone said just pop off the door starting at the bottom. I would like to know where the fastners so I do not break them, as it looks like someone has already broken at least one of them. Thanks, reply here or at ghfun@aol.com.

 

[ghfun]

Never mind, I got it. Thanks anyway

 

[6 Shooter]

Did ya have any problems removing it?

 

[ghfun]

No It poped right off when I found something to jam under there and pry the clips out with out scratching under the door. As I thought, one of the clips has already been busted out.

I need to adjust the windows on both sides a little bit. Do you know where I may find instructions for this? Both windows leak with a hard rain in the front just at the convertible top so I am hoping I can snug it up with an adjustment. Plus there is wind noise on the passenger side.

The reason I had the door panel off is the window stoped working. All I have to do is tap the motor with the hammer while pusing the button and it works again. Apparently the motor gets a dead spot and a little tap fixes it right up.

 

[bluecoupe]

This may help:
http://www.cox-internet.com/johndennington/how_to/window_tip_in.html