White75
Well-known member
- Joined
- Sep 21, 2007
- Messages
- 496
- Location
- Kingwood (Houston) TX
- Corvette
- '75 L48 Auto White, '78 L82 4-spd SA
Well I was going to do this once I was done but I'm more likely to forget what all I did so I'll just make a thread of it. I'm about 3/4 done so I hope I haven't forgotten too much already.
Enough of the jabber.
First step was the interior removal, time to remove all the interior pieces. I started with the A-pillars, header, B-pillars, window trim, etc. Then I went into the dash and got all that removed as well as the center console ( a total pain in the ass with all the wires). Then I ripped out all the carpet, underlayment and seatbelts. I gave everything a good cleaning and degreasing.
Only problem was that I got carried away and completely forgot to take pictures (ADD kicking in)
Well off to grab the camera and here's the result:
Enough of the jabber.
First step was the interior removal, time to remove all the interior pieces. I started with the A-pillars, header, B-pillars, window trim, etc. Then I went into the dash and got all that removed as well as the center console ( a total pain in the ass with all the wires). Then I ripped out all the carpet, underlayment and seatbelts. I gave everything a good cleaning and degreasing.
Only problem was that I got carried away and completely forgot to take pictures (ADD kicking in)
Well off to grab the camera and here's the result:
