T
Tanreall
Guest
I just bought an MSD 6A and I was wondering where would be the best place to mount it thanks.
vader86
Well-known member
Lots of people mount it in the well beneath the headlight, if its wired correctly a little bit of water leaking in wont harm it.
Another place I saw it mounted was on top of the blower motor.
Another place I saw it mounted was on top of the blower motor.
- Thread starter
- #3
S
steve1ph
Guest
i mounted mine to the floor right in front of the driver side tire where the vacume canister is.. usally keep a bag around it. its been there over a year with no probs. have pics if you would like to scope it out.
- Thread starter
- #4
T
Tanreall
Guest
Yes pics would be most appreciated.
- Thread starter
- #5
S
steve1ph
Guest
pics
ok, mail me steve1ph2@comcast.net and i will attach them back to you. its been awhile since iv added them to a post here. had to resize ect.. long way around.
ok, mail me steve1ph2@comcast.net and i will attach them back to you. its been awhile since iv added them to a post here. had to resize ect.. long way around.
Rowdy1
Well-known member
- Joined
- Mar 26, 2001
- Messages
- 1,180
- Location
- Lake Hopatcong, NJ
- Corvette
- 1962 CORVETTE-SOLD 2004 Z16 Z06 CE
Inside
I mounted my 6AL box under the dash to the right of the passenger's leg where the heater usually is. Not much room under the hood of the 62 and I wanted it as far away from heat and water as possible.
I mounted my 6AL box under the dash to the right of the passenger's leg where the heater usually is. Not much room under the hood of the 62 and I wanted it as far away from heat and water as possible.
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
