Welcome to the Corvette Forums at the Corvette Action Center!

Need a peek & a Pix 86-89 C-4 ( convert owners )


Motor head!!!!
Feb 13, 2001
Valencia, CA,USA
88 Convert ( SOLD ) /1973 coupe 4 speed/1964 Vert!
Pop the back of the top & lift it Open the back hatch. look underneath the hatch in the bolster, center. There is a two pin connector... that goes to what?

I'm thinking it's my inside temp sensor.

What color wires.. what color connector.what does the bit it plugs into look like?

Mines missing! yikes!!!!

And my ext temp light is flashing for 60 seconds after start...

Ok I got it, no really I got it..it's OK

In a 1988 convert there is a dark green & a black on the passenger's side rear corner of the luggage compartment, which changes color to a red & black and goes to the center of the bolster..one problem.. I had mine re done so there no hole for the sensor to mount to. so I pulled it back under the lid made a bracket and BINGO I now have a cabin temp sensor & the ext temp light stops flashing an error on start up.



( Not that any of you replied...oh sure ya read it and laughed.... but did ya look... did ya take a pix for your old pal Mike NNNNNOOOOOOOOOO
Ya didn't did you!)

Pack your bags.. were goin on a guilt trip

Now boarding gate 12,


Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors


MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Top Bottom