Need quick help, bolt torques on brake shield

[magicv8]

I can't find the torques for the bolts that hold the front brake shield and the caliper bracket to the steering knuckle. My 66 aim and service manual are no help. Does the 65 or 67 aim or manual show the torques??

 

[firstgear]

here is a good reference.....if you know the bolt size and grade you can get your bolt torque.

Herb

http://raskcycle.com/techtip/webdoc14.html

 

[firstgear]

one more source

http://www.engineershandbook.com/Tables/torque.htm

 

[magicv8]

Thanks - I looked at the chart and put them on at 70-70-100.

I made notes as I took them off (with a torque wrench) 65-65-120, but the big one had lots of corrosion and the small ones are the same thread and strength as the caliper bolt (which are 70), so I'm using 70 for those.