o2 sensor

[silverbullet]

Well i finally found a heated o2 sensor. i got it from Summit racing. MSD makes it. I hooked it up and i still get the check engine light after the car reaches normal operating temperature. Then while driving every time the transmission shifts the carb bogs. Not sure what to do next. In case you haven't follow my previous threads i put ceramic coated header, true dual exhaust by Pypes, edlbrock 2101 intake stock, carb and distributor and ZERO emissions. Please advise.

Thanks
Bill

 

[Sensei]

What codes are you getting? God bless, Sensei

 

[silverbullet]

I get code 15. I believe that is the coolant sensor for low temperature. please advise.

 

[Sensei]

Check and clean the coolant sensor connection.

I recommend this stuff for all electrical connections:

http://cgi.ebay.com/Caig-Deoxit-Con...ryZ46537QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

If that does not do it, then clean the connections at the ECM. (do them all while you are there). Check continuity from the coolant sensor wires to terminals 3 and 7 of the ECM.

If that does not fix it, replace the coolant sensor.

God bless, Sensei

 

[silverbullet]

Thanks it worked.