jseremba
Well-known member
- Joined
- May 16, 2013
- Messages
- 53
- Location
- Toms River, NJ
- Corvette
- 1989 Blue Z51 6 spd Manual Transmission
Hello Everybody,
I own a 1984 4 plus 3 Corvette. I just removed the camshaft and found two lobes round. I have the new camshaft in. My question is "should I remove the oil pan and clean it, so that the camshaft fragments do not cause me problems. Can I do the bearings with the motor in the car.
My oil pressure with the car warmed up is always 10/12 psi. I was thinking of not using synthetic oils in the summer. Or should I be replacing the oil pump and other parts.
Thank you
I own a 1984 4 plus 3 Corvette. I just removed the camshaft and found two lobes round. I have the new camshaft in. My question is "should I remove the oil pan and clean it, so that the camshaft fragments do not cause me problems. Can I do the bearings with the motor in the car.
My oil pressure with the car warmed up is always 10/12 psi. I was thinking of not using synthetic oils in the summer. Or should I be replacing the oil pump and other parts.
Thank you