Plenum

[Vettefan87]

Well I pulled the Plenum off the car to take the ridge off that robs airflow. What is the best way remove this with out hurting the plenum? Thanks


Justin

 

[WNH]

Is that what they call "porting" the plenum????

 

[Moonunit 451]

Well I pulled the Plenum off the car to take the ridge off that robs airflow. What is the best way remove this with out hurting the plenum? Thanks


Justin

I think most folks use a Dremmel, or similar device.

As far as porting this would probably qualify as a mild port job.

 

[Vettefan87]

Will I see any gains doing this? Some people say that it "woke" there car up, and some they could not tell a difference?


Justin

 

[Vettefan87]

Well today was my day off, and I decided to start porting this plenum. What is the best way to clean up all of these shavings? Thanks


Justin

 

[Hrtbeat1]

Soap and water and compressed air is normally how they clean them up. If you really feel like giving it a good cleaning take it to your local quarter car wash and pressure wash it.

 

[Tanreall]

Any pictures of how you ported them? I would really be interested in doing this and I have the right equipment but I'm scared to death that I will screw something up. Any advice now that you have already done it?

 

[Vettefan87]

Once you take the TB off the plenum you can really see how restrictive it is. I am filing off the ridge that is right up front and some of the sides.


Justin