Welcome to the Corvette Forums at the Corvette Action Center!

Rear wheel bearing play

guyglo

Member
Joined
Sep 21, 2003
Messages
10
Location
Isle of Wight, United Kingdom
Corvette
1981 Dk Bronze Coupe
Can anyone advise me please. When the rear wheel bearings are good and correctly adjusted ( 1 to 7 thou end float) can any play be felt when the wheel is rocked from side to side? (driveshaft disconnected, car off the ground).

I can detect a small amount of play in my bearings and wondered if this was normal or I need to take a look.

Thanks

Guy
 
Guy



I believe that with the half shafts removed that If the measurement is less than .010 inch, and the wheel turns smooth, with no noise or binding, the bearings are okay.
 
Thanks for that I have decided to replace the bearings for my own piece of mind

Guy
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom