Welcome to the Corvette Forums at the Corvette Action Center!

removing rear seat bolts on 1980 corvette

SJForbes

New member
Joined
Jun 22, 2021
Messages
2
Location
marysville, wa
Corvette
c3 1980 red red coupe
my corvette assembled flint michigan. my goal is to upgrade interior i have removed the 1/2" hex bolt from the front the seats;
however, the bolt on rear of the seats is NOT a hex bolt but a circular head bolt what tool do i use to remove it. it is about 5/8"
 
I read the title here and thought "Must be some special Corvette, if it has a rear seat"...... :boogie I know, I'm a smart a$$.
 
my corvette assembled flint michigan. my goal is to upgrade interior i have removed the 1/2" hex bolt from the front the seats;
however, the bolt on rear of the seats is NOT a hex bolt but a circular head bolt what tool do i use to remove it. it is about 5/8"

joshua delamater on JustAnswer walked me through my issue and it is resolved...the problem was that the carpet was covering the actual hex bolt. i pulled that carpet up on the wall area behind the seats and there was the bolt.​

 
OK!!!! glad you found out!!!:thumb:thumb
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom