Welcome to the Corvette Forums at the Corvette Action Center!

steering post

pizza3260

Well-known member
Joined
May 9, 2002
Messages
93
Location
nj
Corvette
73 350 coupe
just replaced my steering post to tilt/tele, ignation busser will not shut off, what's the problem.

thanks
tom
 
Did you replace the ignition switch when you did the swap? Sounds to me like you've got something grounded that shouldn't be, like a pinched wire, or a miss-plugged connector.
Andy
 
There is also a small finger type switch the key actuates behind the ignition lock. Could be damaged so it makes contact all the time.
 
Possibly the ignition key warning buzzer switch behind the turn signal switch. Mine had a crack in it causing the switch to be in contact all the time turning on the buzzer.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom