Hrtbeat1
Well-known member
Here's one for ya. My tach is reading way off. Approximately 1500 RPM's off. It seems to be working but it is reading way out of range. At idle its reading almost 1800 and at WOT it pegs way past the 6000 marker. Today Magmotor and I went and did some performance tests with my new chip vs my factory chip. We were using his Ease software and logging each run. When we got back and started analyzing the data we collected it showed the RPMs at idle around 650, where it should be. So my question is anyone got an idea whats amiss or how to correct it for that matter. I know the tach signal comes from the distributor and everythings hooked up or else I wouldn't be getting any tach reading.
Wave On
Wave On