Update on Help Please

[John Robinson]

I just found out today that the parts house that was to get my new ECM can not get one nor can the tell use when they might be able to get one.

I tried all the Corvette parts people that I have catalogs for but they did not have one or would not be getting any until late May maybe. One place did say that if I sent them my cocre they would send it to whoever and if rebuildable I could have it back in about 2 weeks.

We have a Chevy dealer about 30 miles from me that sells a lot of Vettes. They said they could have one in two days from parts distribution. I will belive it when I see it.

I did try EBay but I am not ebay literate so I did not find one there. I have to get this going I missed cruise fest lunch at Damon's in indy last year and don't want to miss it this year.:crazy

 

[bossvette]

John
here is a LT1 for an auto
http://cgi.ebay.com/ebaymotors/94-9...063384436QQcategoryZ33596QQrdZ1QQcmdZViewItem

you can also e-mail some of the Corvette parts sellers to see if they have any.

 

[gmjunkie]

John here's a couple #'s of salvage yards that probly have it !! Warning M&W are proud of there parts!! Hunt's Auto Salvage 1-800-672-2113 M&W Auto Salvage 1-800-845-9692 PS They probly can get it in 2 day's I get 1 day service most of the time here in the Moonshine Capital!! I'd go for the new one from GM!!

 

[Dougs91]

Have you tried calling a local parts supplier(NAPA,Autozone,etc.)? When the ECM in my 91 failed that's where I found mine. Good Luck!!

 

[JonM]

http://www.partsamerica.com/ProductList.aspx?parttype=248&ptset=A&searchfor=Engine+Computer

 

[Fabinatl]

Got mine for the 92 from RockAuto in about 3 days. Ordered over the internet.